Queens, New York

Your Queens electrician for panel upgrades, EV chargers, and emergency repairs

JK Electric Bros is a brother-run electrical outfit based at 71-10 Park Ave in Queens. We do precision electrical work on the borough's real housing stock — pre-war homes with cloth-wrapped wiring, two-family houses with tangled metering, and driveway homes that now need to charge a car overnight.

Queens is not a generic service area for us. It is where we live and where we learned the trade. A 1920s Ridgewood row house does not have the same electrical problems as a 1960s split level in Bayside, and neither of them looks like a new build in Long Island City. Knowing what is likely behind the wall before we open it is the difference between a clean one-day job and an open-ended one.

That matters most on the older housing here. A lot of Queens homes are still running a 100-amp service that was sized when a house had a television, a fridge, and not much else. Add central air, an induction range, a basement apartment, and a Level 2 charger, and that service is doing work it was never designed for. Fuse boxes and early split-bus panels still turn up regularly in Astoria and Woodside — they are not automatically unsafe, but they are past the point where an insurer or a buyer's inspector will let them slide.

We explain what we find in plain language, give you the option that actually fits the house, and put the price in writing before we start.

What we do in Queens

Panel Upgrades

A panel upgrade replaces the breaker box that distributes power through your home — most often moving from 100 amps to a 200-amp panel, the modern standard for most Queens homes. We start with a load calculation on what you actually run today and what you plan to add, then pull the DOB permit before any work begins. On the day itself the service is disconnected, the old panel and its feeders come out, the new enclosure and grounding are set, and every branch circuit is re-landed and labeled so the directory is readable years from now. Where the utility side has to change too, we coordinate with Con Edison and stage the work around their schedule.

EV Charger Installation

A Level 2 charger is a dedicated 240-volt circuit, usually 40 to 60 amps, that refills a car overnight instead of over three days. Before quoting one we do a load review of your existing service, because the honest answer to "do I need a bigger panel" is often no. If there is headroom, we run conduit from the panel to the garage wall or driveway-facing exterior wall, mount the unit at a height that keeps the cable off the ground, and terminate on a properly sized breaker. If there is no headroom, we tell you that before you buy the charger, not after.

Emergency Repairs

Some electrical problems can wait for a scheduled visit and some genuinely cannot. A burning or fishy smell near a panel or outlet, scorch marks, a breaker that trips the moment you reset it, or half the house losing power all point to heat at a connection — and heat at a connection is how fires start. We respond the same day across Queens, isolate the fault, and make it safe first. Only then do we talk about the permanent repair, whether that is a burned receptacle, a failed breaker, or a loose neutral at the service.

Lighting Design

Good lighting is layout and layers, not just fixtures. We plan recessed lighting on a real spacing so you do not end up with hot spots and dark corners, add architectural LED under cabinets, in coves, and along stairs, and put the switching where your hand already reaches. In older Queens homes the practical constraint is usually plaster ceilings and joist direction, so we scope the access honestly up front. Smart dimmers and scene control get wired in during the same trip if you want them, with neutrals pulled to every switch box so the system still works years from now.

Neighborhoods we serve

We cover Queens end to end, from the waterfront towers in Long Island City to the detached homes out in Howard Beach — and the rest of the five boroughs when the job calls for it.

AstoriaLong Island CitySunnysideWoodsideJackson HeightsElmhurstCoronaRego ParkForest HillsRidgewoodFlushingBaysideJamaicaOzone ParkHoward Beach

The housing changes block to block and so does the work. Pre-war homes in Astoria, Ridgewood, and Jackson Heights often still have knob-and-tube remnants, ungrounded two-prong receptacles, and panels that were added onto rather than replaced. Two-family houses across Elmhurst, Corona, and Ozone Park bring metering and separation questions — which panel feeds the basement, how house loads get billed, whether the second unit has its own service. And the driveway-and-garage homes in Bayside, Forest Hills, Rego Park, and Howard Beach are where EV charging actually makes sense, because there is somewhere to park the car and something to mount the charger on.

Why homeowners here call us back

DOB Permits Handled

We file the NYC Department of Buildings paperwork and schedule the electrical inspection so your job closes out clean.

NYC Electrical Code Work

Every circuit, conductor, and termination is done to code — the way an inspector expects to find it.

Same-Day Emergency Response

Burning smell, sparking outlet, half the house dark? Call and we move that day, 24/7.

Queens-Based, Not Dispatched

We work out of 71-10 Park Ave. You get the brothers who answered the phone, not a rotating subcontractor.

Frequently Asked Questions

Straight answers to what Queens homeowners ask us most, before the estimate.

Do I need a permit for a panel upgrade in Queens, NY?

Yes. Electrical panel upgrades in NYC typically require a DOB permit. JK Electric Bros handles the permit coordination as part of the job.

How long does a panel upgrade take in Queens?

Most panel upgrades are completed in one day. More complex service upgrades involving Con Edison coordination may take longer.

Do I need a panel upgrade to install an EV charger?

Not always. We review your existing panel capacity and load before recommending an upgrade. Some installations can use existing service; others require a panel or service upgrade first.

What's the difference between a panel upgrade and a service upgrade?

A panel upgrade replaces the breaker box inside your home. A service upgrade increases the total amperage coming into the property from Con Edison — a bigger scope that requires utility coordination.

Do you coordinate with Con Edison for service upgrades?

Yes. For service upgrades that require utility-side work, we handle the Con Edison coordination process.

Is your work done to NYC Electrical Code?

Yes. Every job is completed in compliance with the NYC Electrical Code, and we coordinate the DOB permit and inspection process where the work calls for it.

Do you offer same-day emergency electrical service in Queens?

Yes. We offer same-day emergency response across Queens and all NYC boroughs for issues like burning smells, sparking outlets, breaker trips, and partial power loss.

Talk to a Queens electrician today

Tell us what the house is doing and we will tell you what it needs.

623-565-7661Request Service